PEFC™ is an international NGO working for responsible forestry practices. PEFC issues certificates to the forestry stakeholders meeting the defined criteria for responsible operational practices. Our industries are part of the environmental forestry chain; sawn goods can be traced and identified all the way from the forest to the finished products in the DIY or merchant stores.
FSC® is an international NGO working for responsible forestry practices. FSC issues certificates to the forestry stakeholders meeting the defined criteria for responsible operational practices. Our industries are part of the environmental forestry chain; sawn goods can be traced and identified all the way from the forest to the finished products in the DIY or merchant stores.
Logo licenses in our MultiSites
MultiSite Moelven Skog FSC-C092806
MultiSite Moelven Virke FSC-C113012
MultitSite Moelven Wood FSC-C115128
MultiSite Weda FSC-C107974
KD56ºC 30min - phytosanitary certificate (FAO/ IPPC/ ISPM 15)
Standard for all our sawmills - The heath treatment of minimum 56 degrees at the heart of the timber, for 30 minutes, guarantees that no bugs, worms et al can survive this treatment.
The norm is also that such timbers should be free from bark (DB = debarked). The agricultural authorities in Sweden - “Jordbruksverket” and in Norway - “Mattilsynet” administer the certification schemes and issues Approval of Kilns and use of KD56ºC 30min logo with identity number.
HT KD DB - ISPM 15
Mills without their own kilns uses routine for HT KD DB - ISPM 15. The agricultural authorities in Sweden - “Jordbruksverket” and in Norway - “Mattilsynet” issues Approval of ISPM 15 marking.
CE marked construction products require certified product control. Guaranteeing that UE specific regulations are met.
Treteknisk (The Norwegian Institute of Wood technology), and SP Trätek, the Swedish equivalent, are the certification bodies in Norway and Sweden respectively. Yearly controlling audits are mandatory for the producers, ensuring neutral supervision.
Concerning EU Timber Regulation (EUTR), Regulation (EU) No 995/2010
EUTR is a common European regulation with the purpose of hindering illegal logging.
All companies placing wood products for the first time on the EU/ EEA (European Economic Area) market are comprised by the regulation, whether the companies are situated within or outside the EU, and must be able to document that their products do not derive from illegal logging.
CE marking of solid wood panelling and cladding is based on the harmonised standard NS-EN 14915 “Solid wood panelling and cladding - Characteristics, evaluation of conformity and marking” Requirements for CE marking
Requirements for certification
NS-EN 14915 states that in order to CE mark solid wood panelling and cladding, conformity with system 4 must be documented. This entails no certification, but the company has to establish an internal production control system and perform an initial type testing.
Document from the manufacturer describing the properties and intended use of a construction product.
Vägledande dokument för lagring, hantering, montering, efterbehandling och underhåll för aktuellt träslag och brandimpregnering.
An EPD® (Environmental Product Declaration) is an independently verified and registered document that communicates transparent and comparable information about the life-cycle environmental impact of products. Both the underlying LCA (Life-Cycle Assessment) and the EPD are always based upon international standards.